Which Nerf Blasters should Choose in Nerfwar

Which Nerf Blasters should Choose in Nerfwar
IF you are play frequently in Nerfwar,we should play with which blaster,now we share our experience to you
Manual Operation Blaster
1. If you choose to take Nerf Retaliator blaster, then you need to change the metal small baffle, metal bolt sled, otherwise the two items must be demaged. However, it increases your cost and stuk darts in barrel when play it, and you will have to remove the stucked bullets every five minutes.
2. Choose other manual operation blasters such as Nerf N-Strike Elite Longshot CS-6, please consider the cost.
3,Nerf Prophecy, if your friends have large hand can’t use it.
4, so the best choice for manual operation blasters are Nerf N-Strike Elite Strongarm Blaster, Nerf Zombie Strike Hammershot Blaster, Nerf N-Strike Elite Mega Magnus Blaster… and even Nerf N-Strike Mega Tri-Break.
Semi/Full-Auto Blaster is still the most popular.
I. Exterior.
1, try to avoid 3D printers, especially the flash hider and iron sight.
2, do not have any red dot, battery life is short.
3. Use the cheapest Nerf Retaliator original buttstock.



4, use the cheapest  PLA silence, in order to protect the extended inner tube, even if you use aluminum alloy tube, it will be paralyzed. Do not make a slender, protruding inner tube that will be damaged. But without extending the inner tube, the bullets fly unstability.



II. internal structure
1, semi-automatic shooting mode, bullet usually stuck in barrel. And many people don’t know the situation when it happen, so continue to press, the battery is overheated and scrapped.
2, the original Worker Nef 3s lithium battery will be burnt regardless of the N-strike Elite or STF, burning a mess.
3, changed to fully automatic, putter and flywheel must be powered by two sets of electricity, otherwise burned.
4, firstly press the power supply to accelerate and then press the trigger, but for many people just as difficult to learn a car.
6, don’t use Worker Nef metal flywheel , it will be easy to Loose, grinding the Worker Nef Flywheel cage, sound like a silver bell.
7, don’t Worker Nef metal Flywheel cage, pay attention to the cost.
8, don’t use three burst mode, or six flywheels, stuck darts make you crazy
9. The  Worker Nef motor selects under 3V turn-speed 11000-12000, otherwise burns. Under the 4s lipo, the coil is not hot for 30 seconds, and the battery is not hot. Under this premise, the torque is as large as possible, it’s fine.
The motor must have a brand, preferably an iron back cover. Do not try  cheapest motor. Motor number is like xxxx/xx, the first two numbers xx  is the speed, do not try more than 30.
In summary, the most suitable choice is + Worker Nerf PLA Suppressor + Retaliator Buttstock + xsw full-auto+ two sets of batteries+ Nerf STF kit. Or Nerf N-Strike Elite Rapidstrike CS-18 Blaster whch is very troublesome to modify but the lower cost   - the principle of modification is the same as above.

评论

发表评论

此博客中的热门博文

Worker Hurricane Blaster

图片
Worker Hurricane Blaster The Worker Hurricane blaster is a flywheel revolver that works with a removable cylinder that  holds 6 darts. The Worker Hurricane is semi-auto with a 2-stage trigger. Pulling the trigger halfway revs the flywheels and pulling it further pushes the darts. The blaster uses 130-size motors and smaller sized flywheels.The complete blaster and cylinders are injection molded in the quality we know from Worker. Now there is no customs issues in every countries Specifications: .FPS: 108 .Capacity: 6rd .Color: White .Material: ABS .Production Method:Injection molding .Product Dimensions: 5.3*15.7*19cm .Product Weight: 292.9g .Package Dimensions: 18.2*6.3*19.7cm .Package Weight: 378.9g .Packing: Box Worker Hurricane 6rd Magazines The Worker hurricane magazines holds 6 long darts. The Worker hurricane magazines are available separately and come in two colors: Blue and White. The magazines have a rotation mechanism built-in. Loading darts ...
阅读全文

How to in stall Nerf Stryfe Worker kriss vector Modified Kit Blaster

图片
How to in stall Nerf Stryfe Worker kriss vector Modified Kit  Blaster   Tool Needed: • Small Phillips-Head Screwdriver • Small Flat-blade Screwdriver Step 1: Remove all the screws on the blaster and beware keeping the screws in box Step 2: Remove all the screws on the upper halve, locate the magazine catch module and remove the screws as shown.  Step 3: Pick up the magazine catch module in safe position. Step 4: Pick the magazine catch piece and replace the spring coil with Worker Nerf spring coil as include in the package. Install the catch back to the nerf stryfe blaster. Step 5: Replace and install the releaser by Worker push button piece, fasten the screws and make sure the magazine catch module secure on the blaster. Cover the halve shell  and fasten Step 6: Step 7: Step 8: Hold the Kriss Vector Housing, install the rail on the top front body, sightly install and slide into Stryfe front bottom ra...
阅读全文

Big Capacity with Worker Hurricane Magwell

图片
  After made worker hurricane blaster ,many customers suggest us design a well for increase the capacity of the small pistol.And some excellent and interested guys design a good item for this one.We decided to make this item for every nerfers Specifications: .Color: Blue .Material: PLA .Product Dimensions: 8.40*4.7*4.7cm .Product Weight: 44.70g .Package Dimensions: 16.00*11.00*5.00cm .Package Weight: 50.00g .Packing: OPP Bag .Added Date:2019-3-27 Most worker mags could compatible with it except Worker 40-rounds mag
阅读全文